Epson LX-810 Technical Manual

REV.-A
Electrical Specifications
Power Conditions
Frequency Range
Power Consumption
insulation Resistance
Dielectric Strength
120V Version
220/240V Version
Environmental Conditions
Temperature
Humidity
Resistance to Shock
Resistance to Vibration
Physical Specifications
Weight
Dimensions
120
VAC & 10% (120V version)
220/240
VAC + 10% (220/240V version)
49.5 to
60.!5 Hz
28W (Draft self-test)
10
Mgohms min. (Between AC Line and Chassis)
(At 50 or 60 Hz, between the AC line and chassis)
1 KV AC
(rmslminute) or 1250V AC (rms/second)
1.5KV AC (rms\l O minutes) or 1250V AC (rms\second)
5 to 35 degrees C (41 to 95 degrees F) -operating
–30 to 60 degrees C (-22 to 149 degrees F) -storage
10 to 80
YO RH (no condensation) –operating
5 to 85 %
FIH (no condensation) -storage
1 G, within 1
mS -operating
2 G, within 1
mS -storage
0.25 G, 55 Hz max. -operating
0.50 G, 55 Hz max. -storage
5.75 Kg
418 mm (Width) X 339 mm (Depth) X 141
mm(Height),
excluding knobs and paper guides
1-9

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)