Epson LX-810 Technical Manual

REV.-A
1.6.3 TA Filter Unit
The TA filter unit contains a power cord ( 120V Version) or AC inlet
(220/240V Version), power switch
fuse, filter circuit, and power transformer.
(120V Version)
(220V Version)
(240V Version)
Figure 1-13. TA Filter Unit
1.6.4 Printer Mechanism (M-3D1O)
The M-3D 10 printer mechanism was developed specifically
for the LX-8 10/850 printer. Its components
include:
Carriage motor
Carriage mechanism
Paper feed motor
Paper feed mechanism
Ribbon feed mechanism
Printhead
Sensors
Figure 1-14. Nlodel-3Dl O Printer Mechanism
1-24
-.

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)