REV.-A
3.2 CUT SHEET FEEDER C80612*
The LX-8 10/850 printer can use C806 12* cut sheet feeder. This cut sheet feeder has the following
features:
1. Cut sheets may be handled in the same way as fanfold paper.
2. Sheets may be manually inserted.
3. The feeder is easily mounted and dismounted from the printer.
4. The feeder requires no electrical connection to the printer.
5. The feeder is extremely reliable.
6. A high level of performance can be achieved.
Figure 3-1. LX-81 0/850 with Cut Sheet Feeder
3-4
To Next Page
Loading...
