Epson LX-810 User Manual

Cut Sheet Feeder
2. While holding down the LINE FEED button, turn on the printer.
(For an NLQ mode test, press the FORM FEED button instead of
the LINE FEED button.)
FORM FEED
INE FEED
A portion of the printout of the first page of the self test is shown
below. The printout of the second page is similar to the original
self test described in Chapter 1.
Th.is is the first line.
This is line XX.
rs
5-10 Using the Printer Options

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)