Epson LX-810 User Manual

Using Single Sheets ^
fms,
Reloading during printing
When you print a document of more than one page using single
sheet paper, the printer stops printing when it reaches the bottom
of the paper. When this happens, the ON LINE light rhay go off ^
automatically or it may remain on, depending on your application
software. If the ON LINE light remains on, the first thing you
should do is press the ON LINE button to take the printer off line. ^
Once the ON LINE light is off, remove the sheet that has just been
printed (if necessary, press the LOAD/EJECT button to eject the
page) and load a new sheet. Press the ON LINE button to start ^
printing the next page and follow any additional prompts from ^
your software.
2-6 Paper Handling ^

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)