Epson LX-810 User Manual

Replacing the Ribbon
Replace the ribbon when the printout becomes too faint to read.
Use only the #8750 standard ribbon cartridge for your printer.
1. Make sure that the printer is turned off, then remove the
printer cover.
2. Open the paper tension unit cover.
6-4 Maintenance

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)