Epson LX-810 User Manual

A.ssembling the Printer
2. Push firmly on the platen knob until it fits against the printer
case.
0
CAUTION: Do not use the platen knob to adjust the
position of the paper as this interferes with the automatic
paper loading system and may cause a paper jam.
ri
Installing the ribbon cartridge
Your printer's ribbon cartridge is designed to allow easy
installation and removal. Before installing the ribbon cartridge,
make sure that the printer is not plugged in an electrical outlet.
1-8 Setting Up the Printer

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)