Epson LX-810 User Manual

Using Continuous Paper
Loading continuous paper
1. Make sure the printer is turned off; then remove the paper
guide. Set the paper release lever to the continuous paper
position. This position is marked by the icon shown in the
illustration below.
2. Release the sprocket units by pulling the sprocket lock levers
forward as shown.
rs
fS
rs
rs
2-8 Paper Handling

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)