Epson LX-810

A.djusting the Loading Position
Using micro-adjustment
1. Make sure that the printer is turned on and that either a single
sheet or continuous paper is ready to be loaded.
2. Press the LOAD/EJECT button to feed paper to the loading
position. Then press and hold down the ON LINE button until
the beeper sounds once; the ON LINE light then begins to blink.
r:::.^ON LINE
OFF LINE
Note: You can use the FORM FEED and LINE FEED buttons for
micro-adjustment only while the ON LINE light is blinking.
3. Press the FORM FEED button to feed the paper forward or the
LINE FEED button to feed the paper backward. When you've set
the desired loading position, you can begin printing; the ON
LINE light stops blinking automatically.
FORM
Using the Printer 3-13