Epson LX-810 User Manual

A^djusting the Loading Position
Note: When the paper reaches the factory-set loading position,
the printer beeps and micro-adjustment feeding pauses for a ^
moment before continuing. You can use this position as a
reference point when adjusting the printer's loading position.
When the paper reaches either the minimum or maximum top
margin, the printer beeps and the paper stops moving.
SelecType is not available when the ON LINE light is blinking. If
you want to use SelecType, first press the ON LINE button. ^
3-14 Using the Printer

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)