Epson LX-810 User Manual

Data Dump Mode
A
Data dump mode is a special feature that makes it easy for
A experienced users to identify the cause of communications
^ problems between the printer and computer. In data dump mode,
an exact printout of the codes reaching the printer is produced.
To use the data dump mode, follow these steps:
^ 1. Make sure that paper is loaded. Either the tractor unit or the
A cut sheet feeder can be used for printing in data dump mode.
2. If the printer is on, switch it off, then hold down the FORM
FEED and LINE FEED buttons at the same time you turn on the
printer.
FORM FEED
LINE FEED
Using the Printer 3-27

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)