Epson LX-810 User Manual

Switching Between Continuous and Single Sheets
Switching back to continuous paper
It is also easy to switch back to printing with continuous paper.
1. Make sure the single sheet is ejected and the printer is off line.
2. Slide the edge guides together so they meet at the center of the
paper's width.
Paper Handling 2-19

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)