Epson LX-810 - Data Control

Commands A^rranged by Topic
Data control
CR Carriage Return
Format:
ASCII code: CR
Decimal: 13
Hexadecimal: OD
Comments: \
Prints the data in the buffer and returns the print position to the
left margin. A line feed may be added if DIP switch 2-4 is ON
or the AUTO FEED XT line on the parallel interface is held ^
LOW.
CAN Cancel Line ^
Format: ^
ASCII code: CAN ^
Decimal: 24
Hexadecimal: 18
Comments:
Removes all text on the print line, but does not affect control ^
codes.
DEL Delete Character
Format:
ASCII code: DEL ^
Decimal: 127
Hexadecimal: 7F
Comments:
Removes the last text character on the print line but does not
affect control codes.
9-12 Command Summary