Epson LX-810 User Manual

Using Continuous Paper
3. Slide the left sprocket unit until it is roughly 1/2 inch or 15
mm from the farthest left position and press down the lever to
lock it in place.
4. Slide the right sprocket unit to roughly match the width of
your paper but do not lock it.
Paper Handling 2-9

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)