Epson LX-810 User Manual

Replacing the Ribbon
&
WARNING: If the printer has just been used, the print
head may be hot. Let it cool before attempting to replace
the ribbon.
3. To remove the ribbon cartridge, grip it by the black plastic tab
and lift the cartridge straight up and out of the printer.
4. Slide the print head to the middle of the printer.
Maintenance 6-5

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)