Epson LX-810 User Manual

Cut Sheet Feeder
Switch between the cut sheet feeder and the push tractor
The LX-810 allows you to switch easily between the cut sheet feeder
and the push tractor without removing either the feeder or the
continuous paper supply.
1.
Make sure the continuous paper is already loaded and in the
standby position. Next, press the ON LINE button to set the
printer off line.
LINE
2. If a single sheet is still in the printer, press the LOAD/EJECT
button to remove it.
LOAD/EJECT
5-14 Using the Printer Options

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)