Epson LX-810 User Manual

Pull Tractor
3. Fit the rear notches on the tractor unit over the rear mounting
pins in the printer. Then, tilt the tractor unit toward you until
the front latches click in place over the front mounting pins.
Push down on the front latches to be sure they are firmly
seated.
4. Pull the paper release lever to the continuous paper position.
Using the Printer Options 5-25

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)