Epson LX-810 User Manual

Pull Tractor
3. Press the LOAD/EJECT button to load the continuous paper;
then press the FORM FEED button. This advances the paper one
page so that you can fit the paper onto the pull tractor.
LOAD/EJECT
FORM
: (D
CAUTION: Never use the platen knob to feed the paper
while the printer is turned on. If you need to adjust the
loading position, be sure to use the micro-adjustment
feature described in Chapter 3.
4. Open the sprocket covers of the pull tractor and pull the
sprocket lock levers toward you to release them.
Using the Printer Options 5-27

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)