Epson LX-810 User Manual

Printing
Note: You can also use the data dump mode to find the cause
of communication problems between the printer and your
application programs. In data dump mode, an exact printout of
the codes reaching the printer is produced. See the section on
the data dump mode in Chapter 3.
If the printer still does not print, try the self test described in
Chapter 1. If the self test works properly, the printer is all right,
and the problem probably lies in the computer, the software or the
cable. If the self test does not work, contact your Epson dealer.
Troubleshooting 7-13

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)