Epson LX-810

Commands CKrranged by Topic ^
ESC N Set Skip-over-perforation
Format:
ASCII code:
ESC
N n
Decimal:
27 78 n
Hexadecimal: IB
4E n
Comments:
The variable n is the number of lines skipped between the last ^
line printed on one page and the first line of the next page. For ^
example, with the standard settings for line spacing (1/6-inch),
and page length (66 lines), ESC N 6 cause the LX-810 to print
60 lines and then skip 6. DIP switch 2-3 performs the same ^
function. This setting is cancelled by ESC O and also by ESC C
or ESC C 0. The value of n must be from 1-127. Overrides the ^
DIP switch 2-3 for the 1-inch skip-over-perforation setting. ^
ESC O Cancel Skip-over-perforation
Format:
ASCII code: ESC O
Decimal: TJ 19
Hexadecimal: IB 4F
Comments:
Cancels the skip-over-perforation set by ESC N. Also, cancels
the DIP switch 2-3 for the 1-inch skip-over-perforation setting. ^
9-14 Command Summary