Epson LX-810

Commands A.rranged by Topic
ESC S 1
Select Subscript Mode
Format:
ASCII code:
ESC
S
1
Decimal:
27
83
1
Hexadecimal:
IB
53
01
Comments:
Prints characters about two-thirds of the normal height in the
lower part of the character space.
ESCT
Cancel Superscript/Subscript
Format:
ASCII code: ESC T
Decimal: 27 84
Hexadecimal: IB 54
Comments:
Cancels either superscript or subscript.
ESC 4
Select Italic Mode
Format:
ASCII code: ESC 4
Decimal: 27 52
Hexadecimal: IB 34
Comments:
Causes characters from the italic character set to be printed. This
command is valid even if the Epson Extended Graphics character
set has been selected by ESC t or the DIP switch 1-3, but
character graphics cannot be italicized.
9-28 Command Summary
f!^!\