Epson LX-810

Commands A.rranged by Topic ^
Word processing ^
ESC a NLQ Justification ^
Format; ^
ASCII code:
ESC
a
n
Decimal:
27
97 n
Hexadecimal:
IB
61
n
Comments: ^
The following values can be used for n: ^
0: Selects left justification.
1: Selects centering. '***
2: Selects right justification. ^
3: Selects full justification.
The default setting is n=0. Full justification (m = 3) is performed
when the buffer becomes full or when one of the following is
received: CR, VI. LF, FF. The commands DEL, HT, BS, CAN, ^
and ESC f 0 are invalid in n = 3 mode. For n=3 there must be
no carriage returns within a paragraph. Justification can be used
in NLQ only, not draft.
9-30 Command Summary