Epson LX-810

continuous paper
Paper that has sprocket-feed holes on both long edges, is
perforated between pages, and is supplied in a folded stack. Also
called fanfold paper.
control code
In addition to the codes for printable characters, the ASCII
standard also includes 33 other codes which are called control
codes. These control codes perform such functions as sounding the
beeper and performing a carriage return or line feed.
cpi
See characters per inch,
cut sheet feeder (CSF)
An optional, detachable device that automatically feeds
single-sheet paper into the printer.
data dump
Sometimes called hex dump. A troubleshooting feature. When the
printer is in data dump mode, it prints both the hexadecimal value
and the ASCII character for each code that it receives. Non-
printable control codes (0-21 hex) are depicted by dots in the
ASCII portion of the printout.
decimal
^ See number systems,
default
^ A value or setting that takes effect when the printer is turned on,
reset, or initialized.
DIP switches
- Small switches in the printer that control various printer functions
^ and set the default status of the printer when it is turned on or
^ initialized. DIP stands for Dual In-line Package.
Glossary GL-3