Epson LX-810 User Manual

Testing the Printer
2. Connect the power cable to the AC inlet on the printer's rear
panel. (In some locations, the power cable is already connected
to the printer.)
rs
3. Plug the power cable into a properly grounded electrical outlet.
1-16 Setting Up the Printer

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)