Epson LX-810

Computer,
coimecting to, 1-26—28
CONDENSED button, 3-4, 3-19,
3-22
Condensed printing, 3-22, 4-4
setting with button, 3-4, 3-19,
3-22
setting with software
command, 9-24
Connecting,
to your computer, 1-26—28
to the power supply, 1-15—16
Continuous paper. See Paper
Control panel, 3-2—5
Copying ROM to RAM, 4-26
Cover,
cut sheet feeder, 5-3, 5-23
printer, 1-9, 1-14, 5-2, 5-23
pull tractor, 5-30, 5-35
CSF mode. See Cut sheet feeder
mode
Cut sheet feeder, 5-2—23
Cut sheet feeder mode, 3-7, 5-5
page length, 5-9
self test, 5-9—11
setting with DIP switch, 3-7,
5-5
setting with software
command, 9-11
specifications, 8-13—14
D
Data Dump, 3-5, 3-27—29
Default settings, 8-15—16
Dimensions of printer, 8-7
DIP switches, 3-6—8
Double-strike printing, 4-5, 9-27
Double-wide printing, 4-4,
9-25—26
Download. See User-defined
characters
DRAFT button, 3-4, 3-19—20
Draft font, 1-17, 1-21—22, 3-4
self test, 1-17, 1-21—22,
5-9—11
Draft printing speed, 3-7, 3-8,
3-20, 4-3
Edge guide,
with single sheet, 1-18, 2-3
with continuous paper, 2-13,
5-31
with roll paper, 5-40
Electrical specifications, 8-7—8
Elite. See Character spacing
Emphasized printing, 4-5, 9-26
Envelopes, 2-27—28, 8-3, 8-5
Epson Extended Graphics
character table, A-3
setting with DIP switch,
3-7, 3-25—26
setting with software
command, 9-31
Escape code (ESC).
See Commands
Fonts, 4-2—3
setting with SelecType, 3-4,
3-19—22
setting with software
commands, 9-22
IN-2 Index