Epson LX-810 User Manual

Connecting the Printer to Your Computer
2. Squeeze the wire clips together until they lock in place on
either side of the connector.
3. If your cable has a ground wire, connect it to the ground
connector beneath the interface connector.
Setting Up the Printer 1-27

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)