Epson LX-810 User Manual

Using Continuous Paper
13. Press the ON LINE button to set the printer on line so it can
accept data.
LINE
The printer remembers the loading position and advances each
page to the same position. If you need to adjust the loading
position, use the micro-adjustment feature. See the section on
adjusting the loading position in Chapter 3.
0
CAUTION: Never adjust the loading position using the
platen knob, and never turn the platen knob while the
printer is turned on.
Note: Before you begin printing, be sure to check the page
length and skip over perforation settings, and readjust the
settings if necessary. See the sections on page length and skip
over perforation in Chapter 3.
rs
2-14 Paper Handling

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)