Epson LX-810 User Manual

Printing on Special Paper
To change the paper thickness setting, follow these steps.
1. Make sure the printer is turned off. Then remove the printer
cover.
it
WARNING: If the printer has just been in use, the print
head may be hot. Allow it cool before touching it.
2. Select the paper thickness you want according to the table on
the next page. For normal use, the lever should always be set
to position 2 on the scale.
fi
Paper Handling 2-23

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)