Epson LX-810 User Manual

Printing on Special Paper
Envelopes
You can feed envelopes individually using the single-sheet loading
feature. Before loading envelopes, you should adjust the position
of the paper thickness lever according to the table on page 2-25.
For details on paper handling, see Using Single Sheets on page 2-2.
When manually feeding an envelope, you may have to push it
down slightly while pressing the LOAD/EJECT button to get it to
feed properly.
rt
LOAD/EJECT
- (D
CAUTION: The printable area for envelopes is shown on
the next page. The print head must not go past the left
or right edge of the envelope or other thick paper. Make
sure your application program settings keep the printing
entirely within this printable area.
Paper Handling 2-27

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)