Epson LX-810 User Manual

Using Short Tear-Off
When you have finished printing and if the paper is at the top
of form position, the printer automatically feeds the perforation of
the continuous paper to the tear-off edge of the printer cover so
you can tear off the last printed sheet.
Note: Short tear-off is performed only when your application
software feeds the paper to the top of the next page. To
manually feed the paper to the top of the next page, press the
ON LINE button to put the printer off line; then press the FORM
FEED button. When you put the printer back on line, the printer
automatically feeds the paper to the tear-off position.
When you resume printing after tearing off the sheet, the paper
automatically feeds backward to the loading position before
printing begins.
3-16 Using the Printer

Epson LX-810 Specifications

General

Print Method	Impact dot matrix
Number of Pins	9
Character Sets	96 characters (USASCII)
Line Spacing	1/6 inch
Paper Path	Rear
Interface	Centronics parallel
Noise Level	55 dB (A)