❏ Wi - F i D i re c t S e t u p
Connects the printer to a wireless (Wi-Fi) network without a wireless router.
Manual Network Setup:
Changes the network settings, such as the device name or TCP/IP.
Connection Check:
Checks the status of the network connection and prints the network connection report. If there are any
problems with the connection, see the report to solve the problem.
Related Information
& “Checking the Network Connection Status” on page 25
& “Making Wi-Fi Settings Manually” on page 20
& “Making Wi-Fi Settings by Push Button Setup” on page 21
& “Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 22
& “Disconnecting Wi-Fi Direct (Simple AP) connection from the Control Panel” on page 28
Menu Options for Epson Connect Services
Select the menus on the control panel as described below.
Setup > Epson Connect Services
Status:
Check whether or not the printer is registered and connected to the Epson Connect services.
Email Address:
Check the printer's email address that is registered to the Epson Connect services.
Register/Delete:
Register or delete the printer to or from the Epson Connect services.
Suspend/Resume:
Select whether to suspend or resume Epson Connect services.
For usage guides, see the following portal website.
https://www.epsonconnect.com/
http://www.epsonconnect.eu (Europe only)
Related Information
& “Epson Connect Service” on page 92
User's Guide
Menu Options for Setup Mode
89
To Next Page
Loading...
Need help?
General
