Managing Projectors 145
See page 163 for recommended solutions to problems.
Air flow sensor error. There is a problem with the
projector’s air flow sensor; contact Epson as
described on page 178.
Lamp cover door open. Close the lamp cover door.
Lamp out. The lamp has reached the end of its life.
Lamp failure at power on. The lamp has reached its
end of life or is installed incorrectly.
High internal temperature error. The projector is
turned off automatically.
Internal (system) error. Contact Epson as described
on page 178.
Fan error. Contact Epson as described on page 178.
Sensor error. Contact Epson as described on
page 178.
Other error. Contact Epson as described on
page 178.
Error status icons (continued)
To Next Page
Loading...
