26 Displaying and Adjusting the Image
The Ppower light should be orange.
2. Press the Ppower button on the projector or on the remote
control.
The projector beeps once and the Ppower light flashes green as
the projector warms up, then an image begins to appear. When
the Ppower light stops flashing and remains green, the projector
is ready for use.
3. If you are prompted to enter a password, see page 70.
Power light
warning
Never look into the lens
when the lamp is on. This
can damage your eyes, and is
especially dangerous for
children.
To Next Page
Loading...
