Using the Projector on a Network 91
Using the EasyMP Software
Once you’ve set up your projector and computer for network
projection, see the EasyMP Network Projection Operation Guide for
instructions on the following EasyMP features:
■ Starting EasyMP Network Projection
■ Projecting over the network (content over IP)
■ Multi-screen projection
■ Using Presentation mode
■ Connecting to a projector on a different subnet
Using Projector E-mail Alerts
When this feature is enabled, the projector sends you an e-mail alert if
it has any problems.
1. Press the
Menu button on the remote control, select the
Network menu, then press Enter.
2. Choose
Network Configuration and press Enter.
3. Choose
Mail, then press Enter. You see the following screen:
4. Highlight
On to receive email notifications, then press Enter.
5. Press
Esc to return to the previous menu.
To Next Page
Loading...
Need help?
General