EasyManuals Logo

Epson POWERLITE 450W User Manual

Epson POWERLITE 450W
174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #106 background imageLoading...
Page #106 background image
106 Maintaining the Projector
The life span of the lamp is about 2500 hours if
Power
Consumption
in the Settings menu is Normal (default), and 3500
hours if this setting is
ECO. Make sure you have a spare lamp handy if
the usage hours on this menu are close to the life span of your lamp.
Replacing the Remote Control Batteries
Replace the batteries in the remote as described below:
1. Turn the remote control over.
2. Press in on the catch on the battery cover as you lift the cover off.
3. Install two AA alkaline batteries, inserting the
+ and ends as
shown.
caution
When replacing batteries,
take the following
precautions:
Replace the batteries as
soon as they run out. If the
batteries leak, wipe away
battery fluid with a soft
cloth. If fluid gets on your
hands, wash immediately.
Do not expose batteries to
heat or flame.
Dispose of used batteries
according to local
regulations.
Do not use batteries other
than those specified in this
User’s Guide and do not
use batteries of different
types or mix old and new
batteries.
Keep these batteries out of
the reach of children.
Batteries are choking
hazards and are very
dangerous if swallowed.

Table of Contents

Other manuals for Epson POWERLITE 450W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson POWERLITE 450W and is the answer not in the manual?

Epson POWERLITE 450W Specifications

General IconGeneral
BrandEpson
ModelPOWERLITE 450W
CategoryProjector
LanguageEnglish

Related product manuals