46 Connecting to Computers, USB Devices, and Other Equipment
When you’ve finished making connections, see page 28 for
instructions on displaying and adjusting the image.
8. When you’re done projecting, do one of the following:
Windows: simply disconnect the USB cable.
Mac OS: click the USB Display icon on the Dock and drag it to
the trash, then remove the USB cable.
Connecting to the VGA Computer Port
You can connect to the projector using the VGA computer cable that
came with it (the monitor port on your computer must be a D-sub
15-pin port).
1. Connect one end of the VGA computer cable to the projector’s
Computer1 or Computer2 port and the other end to your
computer’s monitor port.
2. You may need to change the
Input Signal setting in the
projector’s Signal menu to
RGB or Auto (see page 64).
3. You can connect an optional stereo mini-jack audio cable to play
sound through the projector (see page 53).
4. You may also be able to use the remote control as a wireless mouse
(see page 38).
caution
Don’t try to force a
connector to fit a port with a
different shape or number of
pins. You may damage the
port or connector, or the
device you are trying to
connect.
Computer1 port
Computer2 port
To Next Page
Loading...
Need help?
General