Connecting to Computers, USB Devices, and Other Equipment 45
4. Connect the square end of a USB cable to the projector’s TypeB
(square) USB port.
5. Connect the flat end of the cable to any available USB port on
your notebook or desktop computer.
Messages appear on your computer screen as the projector is
recognized and the software is installed automatically.
On Mac OS, double-click the
USB Display Installer icon to
install the software.
6. Follow the instructions on the screen to install the Epson USB
Display software. If you see a “Digital Signature Warning,” select
Continue or Continue Anyway. (You see these instructions only
the first time you connect.)
After the software is installed, you see your computer’s current
desktop displayed by the projector. You can switch the projector
to other image sources using the
Source Search button on the
remote control or the projector.
7. You can connect an optional audio cable if you want to play
sound through the projector (see page 53).
note
If the software does not
install automatically, you
can install it manually. See
page 113 for instructions.
To Next Page
Loading...
Need help?
General