Using the Projector on a Network 95
4. Select one of the menu options listed on the screen, then change
any of the settings as needed. These settings correspond to those
found in the projector’s menu system.
You cannot change the following settings using a web browser:
■ Pointer Shape, Pattern, or User Button in the Settings
menu
■ User’s Logo, High Altitude Mode, and Language in the
Extended menu
■ Reset All and Reset Lamp Hours in the Reset menu
■ Password protection
Using Web Remote Control
When you access the projector through your browser, you can display
a “virtual remote control” on your computer screen. This lets you
change sources and perform many of the same functions as you can
with the physical remote control.
From the Projector Control menu, select
Web Remote. You see the
following screen:
■ The Power button turns the projector on and off.
■ The Search button searches for signal sources (see page 28).
Source Search
button
USB button
LAN button
Volume buttons
Computer button
Video button
A/V Mute button
Pause button
Power button
Page-up/down
buttons
Closed captioning
button
To Next Page
Loading...
Need help?
General