52 Connecting to Computers, USB Devices, and Other Equipment
Connecting an RGB Video Source
You can connect to an RGB video source using the VGA computer
cable provided with the projector.
1. Connect the cable to the RGB video port on your player and the
Computer1 or Computer2 port on the projector.
2. You may need to change the
Input Signal setting in the
projector’s Signal menu to
RGB (see page 64).
3. If you want to play sound through the projector, see page 53 for
instructions on connecting audio cables.
4. When you’ve finished making connections, see page 25 for
instructions on turning on the projector and page 28 for
instructions on displaying and adjusting the image.
Once the projector is turned on, select the image source by
pressing the
Source Search button on the projector or remote
control.
Connect to RGB
video source
Connect to RGB
video source
To Next Page
Loading...
Need help?
General