112
1 Center of lens
2 Projected image when the lens is set to the home position
3 Maximum range: V × 50%
4 When the horizontal direction is at the maximum value: V × 12%
Parent topic: Using Basic Projector Features
Adjusting the Image Position Using Screen Position
You can adjust the image position if there are margins between the edge of the image and the projected
screen frame.
Note: You cannot adjust the screen position if the Screen Type setting is set to 16:10 for a projector
model or 4:3 for a projector model.
Note: Certain screen type settings are only available on select projector models.
1. Turn on the projector and display an image.
2. Press the Menu button.
3. Select the Extended menu and press Enter.
4. Select Display > Screen > Screen Position.
To Next Page
Loading...
Need help?
General