161
6. To choose the audio you want to hear, select the Audio Source setting, press Enter, select an
audio option, press Enter, and press Menu to exit.
7. To align the projected images, select the Align setting, press Enter, select the setting, press Enter,
and press Menu to exit.
8. To exit the split screen feature, press the Split or Esc button.
Parent topic: Adjusting Projector Features
Using Multiple Projectors
You can combine the projected images from two or more projectors to create one large image. Follow
the instructions in these sections to set up and project from multiple projectors.
Multiple Projector Adjustment Overview
Projector Identification System for Multiple Projector Control
Matching the Screens Manually
Scaling an Image
Parent topic: Adjusting Projector Features
Multiple Projector Adjustment Overview
If you are combining images from multiple projectors, you can adjust the brightness and color tone
difference between each image.
Note: You can display a pattern to aid in adjusting the projected image. Wait 30 minutes after turning on
the projector before setting the focus, zoom, and lens shift for maximum accuracy.
1. Set an ID for the remote control and projectors.
2. Select Multi-Projection as the Color Mode setting on each projector.
3. Adjust the color tone for each screen using the Color Uniformity setting.
4. Adjust the color balance and brightness for each screen using the Color Matching setting.
5. Make sure the Light Source Calibration in the Reset menu is set correctly in each projector. If light
source calibration is performed only in some of the projectors, the white balance and brightness level
of the projected image may differ between the projectors.
Parent topic: Using Multiple Projectors
Related concepts
Projector Identification System for Multiple Projector Control
To Next Page
Loading...
Need help?
General