145
5. Select the Overlay Effect setting again and select On.
6. Select the Shape Filter setting and adjust the options as necessary.
• Shape: select a circle, rectangle, or other shape effect
• Filter Effect: select an option to mask the inside or outside of the shape
• Size: set the shape size
• Position: set the shape position
7. Select the Color Filter setting and adjust the options as necessary.
• Color Filter: select the color
• Custom: adjust red, green, or blue individually
8. Select the Lightness setting and adjust the brightness level.
9. Press the Menu button to exit.
Parent topic: Projecting in Content Playback Mode
Related references
Projector Reset Options - Reset Menu
To Next Page
Loading...
Need help?
General