Epson PowerLite L520W User Manual

220
On/Standby
(power) light
Status light Laser
light
Temp
light
Filter light Status and solution
Off Flashing
blue
Orange Off Off Laser has a problem.
• Make sure that the vents and air
filter are not clogged with dust
or obstructed by nearby objects.
• Clean or replace the air filter.
• If the problem persists, unplug
the projector and contact Epson
for help.
Off Flashing
blue
Off Off Orange Low air flow through the projector.
• Make sure that the vents and air
filter are not clogged with dust
or obstructed by nearby objects.
• Clean or replace the air filter.
• If the problem persists, unplug
the projector and contact Epson
for help.
Varies Varies Flashing
orange
Varies Varies The projector is unable to maintain
constant brightness. The
Constant Brightness setting is
disabled.
Varies Flashing
blue
Flashing
orange
Varies Varies Refresh mode is in progress.
Flashing blue Varies Varies Flashing
orange
Varies High temperature warning. If the
temperature gets too high,
projection automatically stops.
• Make sure that the vents and air
filter are not clogged with dust
or obstructed by nearby objects.
• Make sure the room
temperature is not too hot.
• Clean or replace the air filter.

Epson PowerLite L520W Specifications

General

Brand	Epson
Model	PowerLite L520W
Category	Projector
Language	English