EasyManuals Logo
Home>Epson>Printer>SC-R5000 Series

Epson SC-R5000 Series User Manual

Epson SC-R5000 Series
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
2. Select the roll winding direction
Select the winding direction for the loaded media roll.
3. Set the media length
Set the length of the loaded media. The amount of
media remaining is managed based on the length
entered here.
A
When you have finished loading the media, the
Media Settings screen is displayed. Press Media
to access the registered media number where
the media setting values for the media you
loaded are stored.
If you select a registered media number for
which the Media Type is not set for Media
Management, the screen where you can select
the Media Type is displayed. Select the Media
Type that matches the media you loaded.
If media settings have not yet been made for
new media, select an unassigned number, finish
loading the media, and then perform Media
Management.
B
Check the roll specifications.
On the Media Settings screen, check that the
winding direction matches the winding
direction for the loaded media.
If the direction is different, press Roll Winding
Direction to change the setting.
C
For media that was replaced and the amount of
media remaining has already been printed on,
press Remaining Amount Management to set
the value.
Press Paper Remaining - Remaining Amount
Management, and set it to On. If this is set to
Off, Remaining Amount Management is not
performed. Press Remaining Amount and
enter the value for the media remaining that
has been printed on the leading edge of the
media.
Note:
Two functions are enabled when Remaining
Amount Management is set to On
The following two functions give you a rough idea
of the amount of media available before printing,
making it easier to know when media requires
replacement.
Showing Amount of Media Remaining
The control panel display shows the
approximate amount of media remaining
based on the length set for the media and the
amount used during printing.
Remaining Alert
A warning is displayed when the amount of
media remaining reaches a specified level.
SC-R5000 Series/SC-R5000L Series User's Guide
Basic Operations
54

Table of Contents

Other manuals for Epson SC-R5000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson SC-R5000 Series and is the answer not in the manual?

Epson SC-R5000 Series Specifications

General IconGeneral
BrandEpson
ModelSC-R5000 Series
CategoryPrinter
LanguageEnglish

Related product manuals