C
When using the Auto Take-up Reel Unit, raise
the tension bar.
D
Raise the cutter, and then move it so that the
cutter blade fits the cutter groove properly.
Caution:
❏ The curing heater may be hot; observe
all necessary precautions. Failure to
observe the necessary precautions could
result in burns.
❏ Do not put your hand inside the curing
heater. Failure to observe the necessary
precautions could result in burns.
❏ When cutting media, be careful not to
cut your fingers or hands with the cutter
or other blades.
Removing the Take-up
Roll
Caution:
❏ If the media weighs over 20 kg (44 lbs.), it
should not be carried by one person. When
loading or removing the media, use at least
two people.
❏ Follow the instructions in the manual when
loading media or roll cores or removing the
take-up roll.
Dropping media, roll cores, or take-up rolls
could result in injury.
A
Flip the Auto switch to Off. Take up the cut
media completely by operating the Manual
switch according to how the media is rolled.
B
To prevent the media from sliding off the roll,
support the roll at its left end.
SC-R5000 Series/SC-R5000L Series User's Guide
Basic Operations
66
To Next Page
Loading...
Need help?
General
