B
Insert the waste ink tube into the mouth of the
new waste ink bottle and place it in the waste
ink bottle holder.
Tightly seal the lid on the used Waste Ink Bottle.
c
Important:
You will need the lid for the Waste Ink Bottle
when disposing of waste ink. Keep the lid in a
safe place; do not throw it out.
C
Press OK.
D
Check again to confirm that the new waste ink
bottle is placed correctly, and then press
Complete to reset the waste ink counter.
c
Important:
Be sure to confirm that the waste ink tube is
inserted in the mouth of the waste ink bottle.
Ink will spill onto the surrounding area if the
tube is not inserted in the bottle.
Leave the waste ink in the Waste Ink Bottle for
disposal; do not transfer it to another container.
Note:
Note the following points when transferring waste ink
from the Waste Ink Bottle to another container.
❏ Use a container made of PE (polyethylene) when
transferring the waste ink.
❏ Attach the spout included with the printer to the
rim of the Waste Ink Bottle and transfer the waste
ink.
❏ Pour the waste ink carefully. Pouring the waste
ink quickly may cause it to spill and splatter.
❏ Securely close the lid of the container to which you
transferred the waste ink and store it in a location
that is not exposed to open flames.
❏ Mixing waste ink from color ink and from OP is
not toxic. However, if they are mixed they will
solidify and sedimentation will occur.
Disposing of used waste ink and Waste Ink Bottle
U “Disposal of used consumables” on page 94
Replacing the Wiper Unit
Preparing and Replacement
Timing
The Wiper Unit is nearing the end of its service life.
is displayed
Prepare a new wiper unit as soon as possible.
SC-R5000 Series/SC-R5000L Series User's Guide
Maintenance
91
To Next Page
Loading...
Need help?
General
