Epson SC-R5000 Series User Manual

Printable area
The left and right edges of media recognized by the printer varies as shown below according to the Width
Detection settings.
Width Detection On : The printer automatically detects the left and right edges of the loaded media.
When media edge plates are attached, the area within 5 mm (0.2 inches) of the left and
right edges of the media is recognized as the media edge.
The edges of the media are not detected correctly if the media edge plates are not
attached correctly.
U “Loading media” on page 47
Width Detection Off : The center of the black rectangle on the label below is the standard position for the right
edge of the media. The left edge of the media is the value set (300 to 1625.6 mm [11.81 to
64.00 in]) in Width Detection - Off in the settings menu, regardless of the width of the
media that is loaded.
SC-R5000 Series/SC-R5000L Series User's Guide
Basic Operations
70

Epson SC-R5000 Series Specifications

General

Brand	Epson
Model	SC-R5000 Series
Category	Printer
Language	English