57
11. In your printout, find the pattern with no gap or line between the rectangles and
enter its number in the box on the screen.
If you can’t find an aligned pattern, choose the best pattern and click
Realignment. Then repeat this step.
12. Click Finish to close the Print Head Alignment Utility.
Cleaning the Printer
To keep your printer working at its best, you should clean it several times a year.
1. Turn off the printer, unplug the power cord, and disconnect the cable.
2. Remove all the paper, then use a soft brush to clean the sheet feeder.
3. If the outer case or inside of the sheet feeder is dirty, clean it with a soft cloth
dampened with mild detergent. Keep the printer cover closed to prevent water
from getting inside.
4. If ink accidentally gets inside the printer, wipe off the rollers shown below with a
damp cloth.
Warning: Don’t touch the gears or any other parts inside the printer.
Caution: Never use a hard or abrasive brush, or benzine, alcohol, or paint thinner
for cleaning; they can damage the printer components and case.
Don’t get water on the printer components and don’t spray lubricants or oils
inside the printer.
Clean here
To Next Page
Loading...
Need help?
Printing Technology
Paper Handling
