68
Quality Problems
You see banding (light lines).
■ Clean the print head nozzles; see “Cleaning the Print Head” on page 41 for
instructions.
■ Select a higher Quality Option or Print Quality and turn off High Speed mode;
see “Printing With Windows” on page 15 or “Printing With a Macintosh” on
page 27.
■ Make sure the paper Type (Windows) or Media Type (Macintosh) setting
matches your paper; see page 35 for guidelines.
■ Make sure the printable side of the paper is face up. It’s usually whiter or shinier.
■ The ink cartridges may need replacing; see “Replacing an Ink Cartridge” on
page 45.
■ Try using Automatic mode (Macintosh only); See “Printing With a Macintosh”
on page 27 for instructions.
■ Align the print head as described in “Aligning the Print Head” on page 54.
To Next Page
Loading...
