Line spacing is incorrect.
Cause What to do
The line-space setting in your
software is wrong.
Adjust the line-space setting with your
software.
The typestyles or characters set with your software do not
print.
Cause What to do
Your software is not correctly
configured.
Make sure that your software is
correctly configured for your printer.
The font selected in the default-setting mode or from the
control panel does not print.
Cause What to do
Software settings override
those made in the
default-setting mode or
from the control panel.
Use your software to select the font.
The wrong characters are printed.
Cause What to do
The wrong character table is
selected.
Check your software settings, and
change the character table as
necessary. See “Changing the default
settings” on page 6-10.
L
Loire-P Ref. Guide
Rev.c
A5 size Chapter 8
02-24-97 DR, pass 0
8-16
Troubleshooting
To Next Page
Loading...
